Residual Current Circuit Breaker
-

- CYL9 Residual Current DeviceThis CYL9 Residual Current Device is in conformity with the standard oflEC61008. It can cut off the fault circuit immediately on the occasion of shock hazard or earth leak of trunk line. Thus it is suitable to avoid the shock hazard and fire caused by earth leak.
CYL9 Residual Current Device is mainly suitable for using in varieties of plants, enterprises, buildings, constructions, commerce, guesthouses and families. It can be used in circuits of...
-

- CM611 Motor Protection Circuit BreakerCM611 Motor Protection Circuit Breaker is suitable for using in circuit up to AC 660V or 440V and current 0.1 to 63A.It can be used for protection of overload and short circuit of 3-phase squirrel-cage motors, and starters of motors as well at full voltage. It is suitable to protect the motor with under voltage trip.
It can also be used in operating AC single phase load and DC load. It can monitor...
-

- CL1 Residual Current Circuit BreakerThe CL1 Residual Current Circuit Breaker is a residual current device which provides function of isolation, switching and earth leak protection of electrical circuits.
They have a residual current operated electromechanical release which operates with out any auxiliary source of supply to open a circuit automatically in the case of an earth le-akage fault between phase and earth greater than...
-

- Residual Current Circuit Breaker with Overload Protection Performance:
Thelma setting In (A) 6,10,16,20,25,32,40
Residual current 1An (mA) 10,30,100
Tripping characteristic B,S
Rated voltage AC Un (v) 240...
-

- CYS1 Surge Protective Device (SPD)CYS 1 Surge Protective Devices (referred as SPD) provides protection against surge current resulted from direct or indirect lightning strike or similar surge voltage. SPD is applicable to circuit with rated voltage up to 400V-, rated frequency 50/60Hz.
The product, using metal oxide varistor, designed to protect both phase and neutral line, is of high electricity resistance under normal operations. In case of surge current...
-

- CHL32-100 Isolating SwitchHaving superior dynamic-heating ability, it is mainly used as a main switch for both terminal assembly electric equipment case, and illumination assembly case, and to control various motors and Small power electric euqipment as well, it has no function of protection of over short-circuit...
-

- 3VU1 Motor Protection Circuit Breaker (MPCB)The product is suitable to be used in circuit of rated voltage up to AC 660V 50/60Hz, rated current from 0.1A to 63A.It is applicable for protection of overload & short circuit of 3 phase squirrel-cage motors. It also can be used as direct starter to start the motor and a switch for changeover the circuit under normal conditions...
-

- CYM2 Molded Case Circuit Breaker (MCCB)CYM2 series of molded case circuit breaker is new type product developed and manufactured by adopting international advanced technology. It is supplied with rated insulation voltage 800V and used for circuit of AC50Hz,rated operating voltage AC 400V or below rated operation current up to 800A for infrequent changing over and starting of the motors. Equipped with the protection devices for over-current...