• 
• Circuit breaker
• Contactor
• Distribution box
• Meters
• Push button
• Relay
• Industrial socket & Plug
• Changeover switch

• 1. 
  2. Distribution Box (New)MB 2-4ways
     Install ways: Flush
     Dimensions: length (128mm) x width (140mm) x highness (75mm)
     Cover materials: ABS
     Cover size: length (158mm) x width (140mm )...
     
• 1. 
  2. Distribution BoardsDB-M13-310F
     18way single pole of MCB
     With main 3-phase 100A MCCB Installed
     Three-Phase, Four-wire, 240/415VAC, 50/60Hz
     Indoor Enclosure...
     
• 1. 
  2. TS Weather-protected Distribution BoxMetal enclosures made from a continuous length of sheet steel double folded at the externally and
     Internally protected with polyester epoxy resin Grey paint to RAL-7032 texturized.
     Nez series TS KT with transparent
     Security glass door...
     
• 1. 
  2. GS-M Gear SwitchGS-M Switch- disconnectors and switch-disconnectors-fuses are type tested to BSEN60947-3 and meet the constructional requirements for isolation as specified in BSN60947-3.
     Switches are of the quick make and break type, suitable for use on AC or DC. Units have removable moving contact assemblies to facilitate wiring...
     
• 1. 
  2. Plastic Enclosure of Distribution BoxThe product is about 25℅ the weight of a metal box and can be easily installed or moved. The product is free from corrosion, carries superior insulation.
     The protection degree: IP66
     The products are available for the installation of Terminal Substitution Rail; Button box, small terminal, Signal, Relay and Sensor, Communication and joint box...
     
• 1. 
  2. CBT Distribution BoardType CBT distribution boards are designed to accept any combination of C50 single pole, double pole, triple pole MCB’s and RCBO’s (MCB/RCD’s).
     Modular capacities pf type CBT distribution boards are listed in terms of maximum triple MCB ways. Thus, a four way board will accepted: 4 triple pale MCB’s, 6 double pole MCB’s, 6 RCB’s...
     
• 1. 
  2. Distribution BoxCombination illumination distribution box is for distributing control of modern buildings such as large stories buildings, guesthouse, passenger transport station, commercial net point, laboratory, factory, enterprise etc.., used in AC 50-60Hz, below 415V illuminating and miniature power controlling circuits as over current, overload & short circuit protection and frequency switch under rated working...
     
• 1. 
  2. Distribution BoardWithout main MCB with Main busbar. 100A
     single phase, Three-wire, 1201240VAC, 50/60Hz Indoor Enclosure
     Rated insulation voltage: 500VAC...
     

Products List: ☆ Electrical Components
☆ Circuit Breaker
☆ Miniature Circuit Breaker
☆ Molded Case Circuit Breaker
☆ Earth Leak Circuit Breaker
☆ Residual Current Circuit Breaker
☆ Residual Current Device
☆ Current Transformer
☆ Safety Circuit Breaker
☆ Circuit Breaker Enclosure
☆ Hydraulic Magnetic Miniature Circuit Breaker
☆ Surge Protection Device
☆ Motor Protection Circuit Breaker
☆ AC Contactor
☆ Contact Block
☆ DC Operated AC Contactor
☆ Interlocking Contactor
☆ Contactor Starter
☆ Star-delta Reduced Voltage Starter
☆ Magnetic Starter
☆ Cam Starter
☆ Thermal Overload Relay
☆ Thermal Relay
☆ Power Relay
☆ Kilo-Watt Hour Meter
☆ Digital Panel Meter
☆ Meter Modular
☆ Power Meter
☆ Control Station
☆ Digital Frequency Meter
☆ Multimeter
☆ Ammeter & Voltmeter
☆ Meter Detector
☆ Current Transformer
☆ Distribution Box
☆ Distribution Boards
☆ Junction Box
☆ Bus Bar Support
☆ Industrial Plugs & Sockets
☆ Push Buttons & Indicators
☆ Magnetic Switch
☆ Isolating Switch
☆ Pedal Switch
☆ Push Button Switch
☆ Universal Changeover Switch
☆ Limit Switch
☆ Gear Switch
☆ Toggle Switches